Newly redesigned MSCT Series »

Net Transceivers MOD9200LON (Lonworks® Network Transceiver)

This product is covered by ACI's Two (2) Year Limited Warranty. Learn more

Product overview

Wireless, LonWorks Network Transceiver, 30 Temp, 6 RH Sensors Inputs (Max)


  • Museums
  • Churches
  • Historical Buildings & New Construction

Product specifications

Supply Voltage:
24 VAC, 60Hz (Full wave rectified)
Supply Current:
0.5A Nominal
Screw Terminal Blocks
Wire Size:
16 AWG (1.31 mm²) to 26 AWG (0.129 mm²)
Terminal Block Torque Rating:
0.37 ft-lb (0.5 Nm) Nominal
Operating Temperature Range:
32 to 122ºF (0 to 50ºC)
Operating RH Range:
30 to 50% RH, Noncondensing
Storage Temperature Range:
-4 to 176ºF (-20 to 80ºC)
Data Protocol:
IEEE 802.15.4-2003/2006
RF Characteristics:
900 MHz, Operating Frequency 10 channels between 902 – 928 MHz Transmitter Power: 11 dBm | Receiver Sensitivity: -11 dBm
Transmission Distance:
200 – 300 ft horizontally depending on building type and constructions, and typically one floor above and below the transceiver vertically
LonWorks® Protocols 1:
Temperature: SNVT_temp_p | Override Push Button: SNVT_occupancy Setpoint Adjustment: SNVT_temp_p | Humidity: SNVT_lev_percent Sensor Status/Alarms: SNVT_count PPM: SNVT_ppm The MOD9200LON Transceiver is pre-defined with fixed configurations
Physical Network Connection:
FTT-10 (Free Topology Twisted Pair)
Communication Wire:
Eschelon approved 22 AWG wire
Configuration Software:
Included; Data registers need to be configured prior to use
System Requirements:
• PC (Notebook or Laptop) with Windows 98, XP, Vista, Windows 7, or Windows 10, Ethernet port, and 10 GB of hard drive memory, direct connection from PC to MOD9200LON: RJ45 Crossover Cable (not provided by ACI) • IP Address of PC must have static address of or above
Enclosure Material | Flammability Rating:
ABS Plastic | UL94-5VA
Product Dimensions:
(L) 8.78” (223.01 mm) x (W) 4.72” (119.89 mm) x (H) 2.36“ (59.94 mm)
Product Weight:
2.20 lbs (1.00 kg)

Related products