This product is covered by ACI's Five (5) Year Limited Warranty. Learn more
Product overview
2.5" Thermowell, 1/2" NPT, 304 SS Welded
Application
- Chilled and Hot Water Systems
- Hydronic Heating Systems
- Pumps
- Compressors
- Chillers
- Refrigeration Systems
- Tanks
- Aquariums
- Process Control Systems
- Compressed Air and Gas lines
Product specifications
Thermowell Hex Size:
1.125" (28.57 mm)
Insertion Length:
See Ordering Grid | Tolerance: +/- 0.060” (+/- 1.524 mm)
Shank Type:
Straight
Bore Inside Diameter:
0.260” +/- 0.003” (6.60 mm +/- 0.0762 mm)
Shank Outside Diameter:
0.375” (9.52 mm) +/- 0.010” (0.254 mm)
Tip Thickness:
0.060” (1.524 mm) +/- 0.010” (0.254 mm)
Tensile Strength (304 Stainless Welded Tube):
75,000 PSI @ Ambient Room Temperature
Note 1: All maximum ratings have been calculated using the theoretical values of the materials being used
Allowable Stress (Factor of Safety = 4):
15,000 PSI (1034 Bar) (Weld Joint Efficiency = 0.80)
Note 2: All of the theoretical pressure ratings above are for reference purposes only using a Safety Factor of 4
Maximum Allowable Working Pressure:
6392 PSI (440.71 Bar) from -20ºF (-28.9ºC) to 100ºF (37.8ºC)
Note 2: All of the theoretical pressure ratings above are for reference purposes only using a Safety Factor of 4
Calculated Burst Pressure:
30,130 PSI (2077.39 Bar)
Note 2: All of the theoretical pressure ratings above are for reference purposes only using a Safety Factor of 4
Maximum Operating Temperature:
700ºF (371ºC) (Weld Integrity due to Corrosion may occur above 700ºF)
Pressure (100% Leak) Tested:
100 PSI nominal @ Ambient Air Temperature
Internal “Instrument” Thread:
½” NPS
External “Process” Thread:
½” MNPT - 14
Material Type:
304 Series Stainless Steel
Surface Finish:
Polished to 16 RMS
